Quality Induction heaters online shop in the United Kingdom today by WeldingSuppliesDirect: The gas tungsten arc welding (GTAW) process creates accurate and high-quality welds with great penetration making it suitable for several applications, such as aerospace and automotive industries. While TIG welding has a steeper learning curve than MIG welding, the many adjustable features and functions of a TIG welder make it a very versatile process. Shielded metal arc welding (SMAW) also known as manual metal arc welding (MMAW/MMA) or just stick welding, uses a consumable flux-coated metal electrode to join metals. As we strike the electrode with the base metal, it creates an arc that melts down the materials in the weld pool. The flux releases a shielding gas to protect the weld metal from contamination. Slag deposits are removed after the cooling process using common shop tools such as a wire brush.

UK market look: At just $99, the Goplus is a fantastic value considering what it is equipped to do. In fact, it is the most affordable welder on our list, beating out its competitors by hundreds or even thousands of dollars and putting it in a class of its own. For a budding hobbyist not yet sure if welding is for them, you can’t go wrong with the Goplus. After all, for $99 its welding thickness and the duty cycle is about what one would expect (don’t look to buy this welder if you want it for heavy duty use). The Goplus is light and compact when compared to most other welders. Flux core wire is included. It has four levels of easily adjustable current flow and ten levels of wire speed. The Goplus is able to weld steel and iron at below ¼ inches thickness.

Welding Helmet’s are a very important part of our range at Welding Supplies Direct. The welding helmet you choose can have a huge impact on the quality of your welding. Optrel, 3M Speedglas, Bohler, Jackson & Miller are just some of the brands we stock. An important thing to consider is whether you require an air fed PAPR system. Recent legislation changes require some form of fume extraction when welding in workplace. Find more information on https://www.weldingsuppliesdirect.co.uk/welding-supplies/welding-helmets.html.

The following tips may help: Use the right type of regulator for the gas cylinder. Take care to inspect the regulator before attaching to the cylinder. If the connections aren’t properly made, perhaps you might be using the wrong device. Thus, it is wise to replace it with the right one. Close the valve of the cylinder, as well as release the pressure from the regulator, before removing it from a cylinder. Remove the regulator from the cylinder while transporting it to another location.

If you’re looking for a wheel that can quickly and easily cut through metal, the Cut Off Wheel Metal is the ideal option. This pack contains 25 of Benchmark’s 6? Aluminium Oxide Quality Thin Cut Off Wheels for metal and inox steel work. They are designed for use with an angle grinder or any other cutting device that accepts 7/8 inch arbor attachments. Benchmark offers a quality abrasive wheel with a thin 0.045-inch design, which is for fast and burr-free cutting. A proprietary aluminum oxide grain combination of the wheel provides an aggressive cutting action and the double fiberglass mesh only serves to reinforce its safety and durability. This product is made of the best strength, high cut-rate, bonded abrasive discs used for cutting metal including steel, cast iron, and stainless steel. You should use all necessary protective gear when you are using these discs. Additionally, the Benchmark Abrasives 6 inch Cut Off Wheels Metal For Angle Grinder can achieve speeds up to 11,000 RPM, which allows it to cut through materials quickly and easily. The cut-off wheel has a diameter of 6 inches and is compatible with all angle grinders that have a 7/8-inch shank.

Here’s a lot of welder for the money. The Eastwood MIG 135 industrial Welder features infinite adjustment from 25-135 amps, enough range for 24 gauge sheet metal to 1/4-inch steel plate. It has infinitely adjustable controls and a setup chart on the case cover. It’s also spool gun compatible, giving you the option for 1/4-inch aluminum. The Eastwood MIG 135 industrial Welder mounts 4-inch and 8-inch wire spools, but the wire drive is plastic instead of metal. One other issue with the wire drive is that you’ll need to buy a drive roller if you run flux core wire instead of MIG. Eastwood included the gas regulator and hose for MIG capability, however. It’s got an industry-standard Tweco-style MIG gun for easy-to-find consumables. The connection leads could be longer, but the Eastwood MIG 135 industrial Welder is a versatile, easy to use machine for a great price. If you’re building roll cages or doing chassis work, then you’ll want the model up, the Eastwood 175 Amp MIG Welder is a great 240 volt option that includes the spool gun for aluminum capability right out of the box.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

US tool brand DeWalt are known for making the best angle grinders, and the DCG405N is a step above the competition. Cutting the cord once and for all, this is a powerful grinder that makes use of DeWalt’s excellent XR battery system. This Dewalt angle grinder is not just a powerful cordless grinder though. The grip shape is supremely comfortable, and the whole unit weighs just 1 kg without the battery installed. You can lock-off the power switch when you need to get the grinder into awkward spots as well. This brushless angle grinder also features a host of clever safety features. I like the no-volt release to prevent accidental start-ups when a new battery is installed. The electronic brake and clutch are essential for safe operation too. The 18V brushless motor is ideal for battery use. It can make 69 cuts in ½” steel rebar when used with a 5.0 Ah battery. It doesn’t come with any batteries or one of DeWalt’s excellent TSTAK cases though, which is the case with bare power tools.

Some advices about welding equipment, MIG and TIG welders, plasma cutters. Flat-Position Welding Increases Welding Speed : It’s common knowledge that welding in a horizontal position will be the easiest and fastest way to weld. A flat position is not as taxing to maintain and the welding puddle will stay in place. Take some time to evaluate each project before beginning in order to make sure the majority of welds can be completed in this position. If a job calls for vertical welding, see this article about vertical welding. Core Wire Feeder Increases TIG Welding Speed: For professional welders hoping to speed up TIG welding, a core wire feeder will add filler metal through an automated process. Watch this video on how it works. This enables welders to work with both hands and to maintain a constant flow of wire into the welding puddle. Ed Craig at the Frabricator writes about the wire feeder process first developed in Europe, saying it is “suitable for all-position welding on materials of any thickness, the process addresses traditional GTAW limitations and can enhance both manual and automated TIG weld quality and productivity.”

Adjustable Extraction Tips and 150 CFM Airflow. With 110V power, the portable fume extractor can generate 150 CFM airflow with its 2.3 HP motor. You can adjust the tips of extraction as per your welding requirements. Efficient Dust Collector and Suitable for Various Welding Tasks. I’ve found the dust collector in this weld fume extractor to be quite effective. You can even buy an additional hood for specialized uses. The S130/G130 generates 75 dB sounds when it runs on full power. You can efficiently use this machine for MIG welding, GMAW, stick welding, and gas metal arc welding.

Hougen 115 volt hmd904 magnetic drill press is one of the best mag drill machine available in the market. And also the best thing is that Hougen upgraded this drill press recently. Thus it becomes more efficient and accurate from the previous one through their continuous development and innovative designs. New attachments of this great product are slot drive arbor, which not only enhances accuracy but also enhances the change-out mechanism. Drill bit also made with sturdy material. Cutter/Mount – Rota broach or Copperhead 3/4 inch shank. Thus it can make a smooth hole. This is great for horizontal, overhead, tight areas, and getting out of another piece of steel.

ESAB is a world leader in the production of welding and cutting equipment and consumables. Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader. For each discipline, continuous development of methods, materials and know-how is being directed to meet the challenges posed by the diversity of industry sectors we serve. ESAB is organized to deliver efficient, high-productivity solutions to meet customer requirements in a manner that exceeds their expectations no matter the market segment. Continuous Improvement (Kaizen) Is Our Way Of Life – Set breakthrough objectives, experiment and learn every day, eliminate waste in our business processes, and benchmark the best, then better them. Living this value is done through understating that Change is a Must, and the use of Tools for Improvement. To live this value each ESAB associate fosters an environment of continuous learning employing the Colfax Business System Tools which is the basis of our culture.

GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.

The Hobart Handler 140 is an excellent choice for beginner welders, which is why it’s probably the most popular welder on the market. This thing is solidly built and is a step above many of the other 140A welders. The arc runs smooth and produces great results. It’s suitable for a range of general repair tasks and projects like trailer frames, autobody repair and anything up to 1/4 inch thick. If you’re just getting into welding, you can’t go wrong with this little machine! What’s better is that it’s an absolute steal at under $500. See the full review here.

If you know that your new machine comes with a 2-year warranty, it can take a lot of the stress off your shoulders if your device suddenly stops working. If you can’t find a MIG welder with an appropriate warranty and the right features, it’s often a good idea to choose something that has spare parts which are easy to find. Try not to buy anything that’s made outside of the UK. The price range may be more affordable but the parts would be harder to source. Look for a spool gun so you can weld aluminium. If you plan on using your home welder to weld aluminium, then you’ll need a standard spool gun. Aluminium can quickly become damaged and tangled with a typical welding wire feed spool, so a spool gun will ensure that you can get the best results from your DIY work. See more details at this website.

Sealey is one of the biggest manufacturers of tools and accessories in the UK, offering approximately 8000 items including tools for home, repair shops, agricultural facilities, as well as cleaning. In this variety, we found a gasless MIG welder MIGHTYMIG 100. The machine is able to weld metal sheets of a different thickness thanks to a toggle that allows setting the amperage to the minimum and maximum. The output range will be 55? and 100?, respectively. We should say that the welding time at the minimum power won’t be over 6 minutes. Yet, this welder will run for about 2 minutes at 90? and that’s great considering its moderate price. In addition, you’ll be able to manage the joint by varying the speed of the wire feed, just turn the relevant control knob to the desired setting. By the way, the welder is compatible with a flux-cored wire up to 0.9 mm, and the weight of the spool should be 0.9 kg. Like most welding tools, it features an overheating protection, and the orange light will notify you when the welder gets overheated after a long use. Apart from that, the forced air cooling system will chill the welder’s internal parts. The welder has a non-live torch for your convenience that will increase the accuracy of welding and provide safety.